The short version
- The attack. Attackers reached refrigeration controllers at dozens of stores and raised setpoints or switched units into defrost mode, which made them heat instead of cool. Some freezers were reported set to 50°C.
- The equipment. Many affected systems were internet-connected Danfoss controllers, several of them discontinued; Copeland equipment was also reported hit in Belgium. Danfoss told NOS that the Dutch systems attacked were not on a secure network and still used default passwords.
- Food losses. Chains threw away chilled and frozen stock, and one butcher estimated €15,000 of meat ruined. Not every company called it an attack: ICA did not confirm a cyberattack and Ahold described an IT incident.
- The earlier French wave. Three weeks earlier, around 700 French supermarkets were hit, according to the Paris prosecutor's office. No source establishes whether the two waves share perpetrators, and no group has claimed responsibility for either.
- No current patch duty. EU Cyber Resilience Act obligations on manufacturers begin in December 2027. Until then, sources say, nothing legally requires makers to keep fixing the discontinued controllers involved.
Timeline
| Date | Event |
|---|---|
| October | A first wave hits refrigeration controllers at around 700 French supermarkets, a figure the Paris prosecutor's office gives to Recorded Future News. |
| 16 October | France's national computer emergency team, CERT-FR, last updates its alert on attacks against Danfoss and Copeland/Dixell controllers. |
| 1-2 Nov | Sabcobel technicians begin disconnecting affected installations from about 1 a.m.; Ahold messages store managers by SMS around 4 a.m., according to RTL. |
| 2 Nov | Supermarket chains confirm overnight refrigeration incidents at stores in Belgium, Sweden, the Netherlands, Luxembourg, Ireland, Estonia and elsewhere. |
| 3 Nov | Danfoss's advisory page carries no advisory about the attacks, The Hacker News reports. |
How the attacks worked
Refrigeration controllers are computers that run a store's fridges and freezers. Many are connected to the internet so contractors can monitor them and fix faults remotely. Attackers used that access to change settings: in Belgium they put units into defrost mode, meant to clear ice, which instead made them heat up; elsewhere they raised setpoints. Stores in Sweden and Estonia reported freezers set to 50°C.
Stephan Moelans, chief executive of the Belgian refrigeration contractor Sabcobel, told Belgian media that technicians began disconnecting affected installations from about 1 a.m. and that the attacker had used the same vulnerability as in the French wave. He said the units needed physical changes, not only a software update. According to RTL, Ahold alerted store managers by SMS around 4 a.m. and some stores moved stock into refrigerated trucks.
Danfoss told Dutch broadcaster NOS that the Dutch systems hit were not on a secure network and still used default passwords, and told Belgian broadcaster VTM that the weakness lay mainly in outdated software, according to Euronews. Moelans said: "The simplest solution is to manage the refrigerators via a secure internet connection."
Who was affected
Counts varied. BleepingComputer put the total above 115 stores across six countries. Ahold reported about 40 sites, Carrefour 15 of more than 700, Intermarché 10 to 15, SuperValu 13 of 223, Coop 6 or 7 of about 800, Spar 5 run by independent owners, and ICA at least 4. At least 17 Dutch butchers and small shops were hit. The Hacker News also lists stores in Finland, Portugal and Italy, and one IKEA store in Mons, Belgium.
Not every company called it a cyberattack. ICA said it did not confirm one, Ahold Delhaize described an IT incident, and Kesko in Finland said the cause was under investigation. Musgrave took chilled and frozen products off sale at its SuperValu stores as a precaution and said the matter was resolved by Monday afternoon. A butcher in Hove, south of Antwerp, told Reuters his fridges reached 18°C and about €15,000 of meat was ruined.
Legacy equipment and the absence of a patch duty
After the French attack, Danfoss and Copeland said the affected devices were mainly discontinued products that no longer received security updates. Danfoss's October 2025 newsletter set out a hard end of service for those legacy products and cited recent European cybersecurity legislation. The EU Cyber Resilience Act will require manufacturers to offer a support period from December 2027; the sources say no legal obligation to fix such products applies now.
The most detailed public guidance remains CERT-FR's October alert, last updated on 16 October. It covers Danfoss AK-SM and AK-SC controllers and Copeland and Dixell XWEB units, and says campaigns against them are probably still under way. When The Hacker News checked on 3 November, Danfoss's advisory page listed no advisory about the attacks.
No group has claimed responsibility for either wave. Katrien Eggers of Belgium's Centre for Cybersecurity (CCB) said: "It is not known who is behind this attack, and it may never be possible to identify them." She said the centre was concerned about a rise in incidents partly due to the targeted use of AI, but that it did not know whether AI featured in these attacks.
What is not known yet
- Who carried out the attacks, and whether the November wave and the October French wave were the work of the same actor.
- Whether AI played any part, which Belgium's Centre for Cybersecurity said it could not determine.
- The total number of stores affected, since counts differ between sources and several chains gave no figure.
- Whether any controller that had been secured was still reached, or only ones left exposed.
- Whether anything beyond refrigeration settings was accessed.
What to do
If you operate refrigeration or building controllers
- Make the devices unreachable from the internet, including any unit on a public IP address; CERT-FR advises checking your insurance contract before cutting the data feed to your refrigeration contractor.
- Change default passwords, set Danfoss devices to the Strict security level and apply the manufacturer's current firmware.
- Review the whole configuration, especially defrost schedules, for changes you did not make.
- Give contractors remote access only through a VPN or protected network; filtering their IP addresses at a firewall is an emergency measure, not a lasting fix.
If a refrigeration contractor manages your systems
- Ask which controller models and firmware versions are in use and whether they appear on CERT-FR's list of Danfoss AK-SM/AK-SC and Copeland/Dixell XWEB devices.
- Confirm that every remote connection runs over a VPN or protected network rather than a direct internet link.
- Identify which stores rely on equipment outside your central network protections and plan replacement for discontinued models that no longer receive updates.
For everyone else
- Inventory the remote-controlled operational equipment you depend on, from cold chain to heating and cooling, and record whether each device can be reached from the internet.
- Where a supplier holds the credentials, establish who can reach the device and how that access is authenticated.
Update log
- First published.
Sources
- New Wave of Refrigeration Cyberattacks Hits Supermarkets Across Europe, Forcing Stores to Pull Food
- Hackers disrupt refrigeration systems at European supermarkets
- A fresh wave of cyberattacks has hit Europe’s supermarket refrigerators, destroying food across countries
- Second wave of suspected cyberattacks hits supermarket freezers across Europe
New incident reports by email
One email a week with the reports published since the last one.